Teradek Bolt-PRO600-960
BLK #287-0019
€ 40.00 + ΦΠΑ
- € 40.00 + ΦΠΑ
- € 96.00 + ΦΠΑ
- € 134.00 + ΦΠΑ
- € 312.00 + ΦΠΑ
- Wireless Video Transceiver Set
- Transmitter 3G/SD-SDI & HDMI
- Range: 200m line of sight
- 3G/SD-SDI Loop Out
- Receiver 3G/SD-SDI & HDMI
- Mini USB for Firmware updates
- High Quality
- 1-year Warranty
Bolt-PRO600-960
The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2000ft over the unlicensed 5GHz band. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.
Bolt Pro 300
The Bolt Pro 300 offers up to 300ft of zero latency wireless video, perfect for focus pullers and director’s monitors. The 300 model comes in HDMI, 3G-SDI, and dual I/O varieties and includes a new fan-less receiver design with internal antennas. Like all Bolt models, the 300 also includes the new USB 3.0 GRAB Engine.
Bolt Pro 600
The Bolt Pro 600 offers all of the same great features of the 300 model, in addition to an OLED screen for quick RX pairing, manual frequency selection, external antennas, and a transmission range of up to 600ft line of sight. Bolt Pro 600 comes in HDMI, 3G-SDI, and dual I/O models.
Bolt Pro 2000
The Bolt Pro 2000 increases the line of sight range all the way up to 2000ft and also comes in HDMI, 3G-SDI and dual I/O models. The 2000 model includes every feature found on the Bolt Pro 600 and can be outfitted with high gain antennas for increased range and resiliency.
USB 3.0 GRAB Engine
Capture cards are a thing of the past with Teradek’s new GRAB Engine. Every Bolt RX includes a USB 3.0 output that allows you to ingest Bolt’s uncompressed video feed directly into a computer or DIT cart with no added delay.
Real-Time Cross Conversion & Extras
All Bolt models support real-time format conversion from TX to RX, allowing you to automatically cross convert from HDMI to 3G-SDI (or vice versa) without any extra hardware. Each model also outputs a test pattern when the video signal is lost and both the 600 and 2000 models support quick RX pairing via the OLED screen and manual frequency selection.
Bolt Pro 300
Transmitter | Receiver | |
Video | ||
Video resolution | 1080p60/59.94/50/30/29.97/25/24/23.98 | |
1080psf30/29.97/25/24/23.98 | ||
1080i60/59.94/50 | ||
720p60/59.94/50 | ||
480p59.94/576p50 (via HDMI ports only) | ||
480i(NTSC)/576i(PAL) | ||
Color sampling | Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color) | |
Inputs | 1 x 75 Ohm BNC | No |
1 x Type A receptacle HDMI | ||
Outputs | 1 x USB 3.0 micro B receptacle | |
1 x 75 Ohm BNC(Loop-out) | 1 x 75 Ohm BNC | |
1 x Type A receptacle HDMI | ||
Delay(TX to RX) | <0.001sec (when no video format conversion is enabled) | |
Audio | ||
Format support | 48kHz 24-bit PCM | |
Wireless | ||
Frequency | Non-DFS Frequencies: | |
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | ||
EU & JP : 5.19 ~ 5.23 GHz | ||
DFS Frequencies: | ||
US : 5.27 ~ 5.55 GHz and 5.67 GHz | ||
EU & JP : 5.27 ~ 5.67 GHz | ||
RF power | 17dBm EIRP | 15dBm EIRP |
Range | Up to 300ft line of sight | |
Unicast / Multicast | Unicast/Multicast | Unicast/Multicast |
Noise rejection | Can coexist with WiFi and 5GHz cordless phones | |
Power | ||
Input | 2-Pin Lemo 7-28 VDC | 2-Pin Lemo 7-28 VDC |
Internal battery | No | No |
Consumption(1080p60) | 6.5 Watts | 8.2Watts |
General | ||
LCD screen | No | No |
Menu joystick | No | Yes |
Size | 1.06x2.61x4.42inches(27.0x66.1x112.3mm) | 1.0x3.5x5.8inches(25.2x88.9x146.5mm) |
Weight | 9.2oz(262g) | 12.2oz(346g) |
Firmware | Upgrade via Mini-USB | |
Operating temperature | 0 ~ 50 deg-C | |
Chassis material | Cap:Plastic | Cap:Plastic |
Body:Milled aluminum | Body:Milled aluminum | |
Mountability | Hot-shoe mount | Hot-shoe mount |
Multiple mounting options with 1/4" holes | Multiple mounting options with 1/4" holes |
Bolt Pro 600
Transmitter | Receiver | |
Video | ||
Video resolution
|
1080p60/59.94/50/30/29.97/25/24/23.98 | |
1080psf30/29.97/25/24/23.98 | ||
1080i60/59.94/50 | ||
720p60/59.94/50 | ||
480p59.94/576p50 (via HDMI ports only) | ||
480i(NTSC)/576i(PAL) | ||
Color sampling | Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colors for the rest | |
Inputs
|
1 x 75 Ohm BNC |
No
|
1 x Type A receptacle HDMI | ||
Outputs
|
1 x USB 3.0 micro B receptacle | |
1 x 75 Ohm BNC(Loop-out) | 1 x 75 Ohm BNC | |
1 x Type A receptacle HDMI | ||
Delay(TX to RX) | <0.001sec (when no video format conversion is enabled) | |
Audio
|
||
Format support | 48kHz 24-bit PCM | |
Wireless
|
||
Frequency
|
Non-DFS Frequencies: | |
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | ||
EU & JP : 5.19 ~ 5.23 GHz | ||
DFS Frequencies: | ||
US : 5.27 ~ 5.55 GHz and 5.67 GHz | ||
EU & JP : 5.27 ~ 5.67 GHz | ||
RF power | 19dbm EIRP(with two 2dbi antennas) | 17dbm EIRP(with one 2dbi TX antenna) |
Range | Up to 600ft line of sight | |
Unicast / Multicast | Unicast/Multicast | Unicast/Multicast |
Noise rejection | Can coexist with WiFi and 5GHz cordless phones | |
Power
|
||
Input | 2-Pin Lemo 7-28 VDC | 2-Pin Lemo 7-28 VDC |
Internal battery | No | No |
Consumption(1080p60) | 7.8 Watts | 8.5Watts |
General
|
||
LCD screen | No | Yes |
Size | 4.3" x 2.6" x 1.1"(109.2 x 66.0 x 26.7mm) | 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm) |
Weight | 9.9oz(282g) | 13.3oz(376g) |
Firmware | Upgrade via Mini-USB | |
Operating temperature | 0 ~ 50 deg-C | |
Chassis material | Milled aluminum | Milled aluminum |
Mountability
|
Hot-shoe mount | Hot-shoe mount |
Multiple mounting options with 1/4" holes | Multiple mounting options with 1/4" holes |
Bolt Pro 2000
Transmitter | Receiver | |
Video | ||
Video resolution
|
1080p60/59.94/50/30/29.97/25/24/23.98 | |
1080psf30/29.97/25/24/23.98 | ||
1080i60/59.94/50 | ||
720p60/59.94/50 | ||
480p59.94/576p50 (via HDMI ports only) | ||
480i(NTSC)/576i(PAL) | ||
Color sampling | Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later; 8-bit color for the rest | |
Inputs
|
1 x 75 Ohm BNC |
No
|
1 x Type A receptacle HDMI | ||
Outputs
|
1 x USB 3.0 micro B receptacle | |
1 x 75 Ohm BNC(Loop-out) | 1 x 75 Ohm BNC | |
1 x Type A receptacle HDMI | ||
Delay(TX to RX) | <0.001sec | |
Audio
|
||
Format support | 48kHz 24-bit PCM | |
Wireless
|
||
Frequency
|
Non-DFS Frequencies: | |
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | ||
EU & JP : 5.19 ~ 5.23 GHz | ||
DFS Frequencies: | ||
US : 5.27 ~ 5.55 GHz and 5.67 GHz | ||
EU & JP : 5.27 ~ 5.67 GHz | ||
RF power | 22dbm EIRP(with two 5dbi TX antennas) | 17dbm EIRP(with one 2dbi TX antenna) |
Range | Up to 2000fts line of sight | |
Unicast / Multicast | Unicast/Multicast | Unicast/Multicast |
Encryption | AES-128 | |
Noise rejection | Can coexist with WiFi and 5GHz cordless phones | |
Power
|
||
Input | 2-Pin Lemo 7-28 VDC | 2-Pin Lemo 7-28 VDC |
Internal battery | No | No |
Consumption(1080p60) | 7.7 Watts | 8.0 Watts |
General
|
||
LCD screen | No | Yes |
Size | 4.3” x 2.6” x 1.0”(109.2 x 66.0 x 26.8 mm) | 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm) |
Weight | 9.5 oz(270g) | 13.8oz(390g) |
Firmware | Upgrade via Mini-USB | |
Operating temperature | 0 ~ 50 deg-C | |
Chassis material | Milled aluminum | Milled aluminum |
Mountability
|
Hot-shoe mount | Hot-shoe mount |
Multiple mounting options with 1/4" holes | Multiple mounting options with 1/4" holes |